| Management number | 235507631 | Release Date | 2026/07/02 | List Price | $47.25 | Model Number | 235507631 | ||
|---|---|---|---|---|---|---|---|---|---|
| Category | |||||||||
Create a DIY/homemade water fountain, convert an electric fountain to solar power with battery backup (when you connect a 1/4" diameter hose to this pump), or add a festive spray to your pond or birdbath, with this solar panel-and-pump kit. Capable of projecting water 47" into the air, this kit is ideal for manmade outdoor ponds and birdbaths that maintain at least 6" of water. To assemble, connect the solar-panel, pump, and LED light each directly to the battery box via their attached cords cords, plugging them into their designated outlets. The battery box face has buttons that control the connected components.
To engage/disengage the pump and light, use the "POWER ON/OFF" button; to set the unit to draw solar power, push the central "Sun Battery" button so that the green light above "Sun" is on. To switch to battery power, push the "Sun Battery" button so that the green light above "Battery" is illuminated. The WATER FLOW button allows you to increase/decrease the water pressure created by the pump. Please note that the solar panel must be in direct sunlight to charge the battery, and/or power the pump via solar energy.
Features of the Solar Pump and Panel Kit:
General Information: Water flow is 66 GPH with maximum lift of 36". The pump comes with adapters so you can make your own waterfall or convert an electric fountain to a solar powered fountain. The pump fits the inside diameter of a hose of 1/4". If you connect the pump to a 1/4" diameter hose the lift is 36".
The battery generally lasts between 12-18 months, but with repeated charges and discharge cycles the battery will become less efficient and battery capacity may reduce. If the battery does appear less efficient you may try and boost charge it. In order to boost charge the battery you must leave off for 2-3 sunny days to allow maximum charge to the battery. If the boost charge does not help the battery than you will need to replace it. Contact us for replacement batteries.
This kit comes with two 16' cables, one for the lights and one for the pump, for the pump and LED light to connect to the solar panel. For an additional purchase, you can add a 16' cable extension pack for your pump and LED light, giving you 32 feet for placement of your solar panel.
Some Helpful Q & As About the Operation of this Solar Pump and Panel Kit:
Q: How do you know when the battery is charging, what buttons need to be pushed?
A: The charging light will flash when the battery is charging; the "POWER ON/OFF" button need to be pressed before charging.
Q: When does the charging light turn on?
A: When the system is on, and solar panel is in direct sunlight, the charging light will light up.
Q : When does the battery light turn on?
A: When the battery power is low or drained, the "LOW bat." light will flash
Q: How do you charge the battery without running the pumps?
A:. Push the "POWER ON/OFF" button to turn off all lights. Next, hold down the "POWER ON/OFF" button for 5 seconds until you see that all the lights are flashing, now you can charge the battery only, without the pump running.
If you notice any omissions or errors in the product information on this page, please use the correction request form below.
Correction Request Form